H301-OLYMPUS-IX3-SVR
Stage compatibility: screws onto Olympus IX3-SVR Stage
Magnetic inserts allow to use:
- 35/60 mm Petri
- 1x3 in. / 1x2 in. chambered slides
- 6-12-24-48-96 MW Plates
- Sliding lid for easy pipetting
- Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
- Lid: both the glass and the metal frame encasing the glass are heated. The metal frame uses electric resistances, and the glass is coated with Indium Tin Oxide (ITO) which is optically transparent and electrically conductive
- Base: the metal frame of the base of the chamber is heated by means of electric resistances
- Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
- Magnets allow easy interchange of chamber inserts
- Magnetic locks hold Petri, Slides and MW in correct position inside the chamber
- Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in the chamber riser
Available Inserts
| 6MW | 6 well plates |   |
| 12MW | 12 well plates |  |
| 24MW | 24 well plates |  |
| 24MW-NUNC | 24-well NUNC/GREINER plates |  |
| 48MW | 48-well plates |  |
| 96MW | 96-well plates. |  |
| MW-OIL | Open frame to image multi well plates with oil immersion objectives |  |
| 1x35-M | #1 35mm Petri-dish |  |
| 1xGS-M | #1 1x3in. chamberslide |  |
| 1xLABTEK-M | #1 Lab-Tek 1x2 in. chambered cover glass |  |
| 1xLABTEK-II-M | #1 Lab-Tek II 1x2 in. chambered cover glass |  |
| 1x60-M | #1 60mm Petri-dish |  |
| 1xT25-M | #1 Nunc and Greiner T25 flask |  |
| 2x35-M | #2 35mm Petri-dish |  |
| 2xGS-M | #2 1x3in. chamberslides |  |
| 2xLABTEK-M | #2 Lab-Tek 1x2 in. chambered cover glass |  |
| 2xLABTEK-II-M | #2 Lab-Tek II 1x2 in. chambered cover glass |  |
| 2x60-M | #2 60mm Petri-dish |  |
| 4x35-M | #4 35mm Petri-dish |  |
| GS35-M | #1 1x3in. chamberslide and #2 35mm Petri-dish |  |
| LABTEK-35-M | #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish |  |
| LABTEK-II-35-M | #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish |  |
| LABTEK-60-M | #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish |  |
| LABTEK-II-60-M | #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish |  |
| GS60-M | #1 1x3in. chamberslide and #1 60mm Petri-dish |  |
| 6035-M | #1 60mm Petri-dish and #1 35mm Petri-dish |  |
Available LIDs
| H301-KOEHLER LID | Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm |  |
| H301-INJECTION-LID | Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen Note: compatible only with specimen holder 1x35 |  |
| H301-LASER-INTERLOCK-LID | Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted Note: compatible only with specimen holder 1x35 |  |
![H301-OLYMPUS-IX3-SVR-[SLIDING LID]_600x600.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_olympus_ix3_svr/H301-OLYMPUS-IX3-SVR-%5BSLIDING%20LID%5D_600x600.jpg)
![H301-OLYMPUS-IX3-SVR-[KOEHLER LID]_600x600.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_olympus_ix3_svr/H301-OLYMPUS-IX3-SVR-%5BKOEHLER%20LID%5D_600x600.jpg)
![H301-OLYMPUS-IX3-SVR-[SLIDING LID]-[DIMENSIONS].jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_olympus_ix3_svr/H301-OLYMPUS-IX3-SVR-%5BSLIDING%20LID%5D-%5BDIMENSIONS%5D.jpg)
![H301-OLYMPUS-IX3-SVR-[KOEHLER LID]-[DIMENSIONS]_600x600.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_olympus_ix3_svr/H301-OLYMPUS-IX3-SVR-%5BKOEHLER%20LID%5D-%5BDIMENSIONS%5D_600x600.jpg)
![H301-OLYMPUS-IX3-SVR-[6MW]_600x600.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_olympus_ix3_svr/H301-OLYMPUS-IX3-SVR-%5B6MW%5D_600x600.jpg)
H301-OLYMPUS-IX-SUSP
Stage compatibility: screws onto IX-SUSP, GX-SVR, GX-SFR, BX3-SSU, IX2-SFR, IX2-SVL-2 - comes with Sliding Lid
Magnetic inserts allow to use:
- 35/60 mm Petri
- 1x3 in. / 1x2 in. chambered slides
- Sliding lid for easy pipetting
- Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
- Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
- Magnets allow easy interchange of chamber inserts
- Magnetic locks hold Petri and Slides in correct position inside the chamber
- Perfusion holes: 8 channels for 2.5mm O.D. tubings are available in chamber riser.
Available Inserts
| 1x35-M single | #1 35mm Petri-dish |  |
| 1xGS-M-single | #1 1x3in. chamberslide |  |
| 1xLABTEK-M-single | #1 Lab-Tek 1x2 in. chambered cover glass |  |
| 1xLABTEK-II-M-single | #1 Lab-Tek II 1x2 in. chambered cover glass |  |
| 1x60-M-single | #1 60mm Petri-dish |  |
Available LIDs
| H301-KOEHLER LID-2 | Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm |  |
| H301-INJECTION-LID-2 | Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen. Compatible only with specimen holder 1x35 |  |
| H301-LASER-INTERLOCK-LID-2 | Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted. Compatible only with specimen holder 1x35 |  |
H301-PRIOR-NZ500
Stage compatibility: fits on Prior NZ500 piezo Z-stages
The chamber can fit:
- 35/60 mm Petri
- 1x3 in. / 1x2 in. chambered slides
- 6-12-24-48-96 MW plates
- Uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid
- Magnets allow easy interchange chamber insert
- Magnetic locks hold Petri, Slides in correct position inside the chamber
- Perfusion holes: channels for 2.5 mm O.D. tubings are available in chamber riser
- Removable riser to fit standard multiwell plates or to perform perfusion
Available Inserts
| 6MW-PRIOR-N500 | 6 well plates | |
| 12MW-PRIOR-N500 | 12 well plates | |
| 24MW-PRIOR-N500 | 24 well plates | |
| 24MW-NUNC-PRIOR-N500 | 24-well NUNC/GREINER plates | |
| 48MW-PRIOR-N500 | 48-well plates | |
| 96MW-PRIOR-N500 | 96-well plates. | |
| MW-OIL-N500 | Open frame to image multi well plates with oil immersion objectives | |
| 1x35-PRIOR-N500 | #1 35mm Petri-dish | |
| 1xGS-PRIOR-N500 | #1 1x3in. chamberslide | |
| 1xLABTEK-PRIOR-N500 | #1 Lab-Tek 1x2 in. chambered cover glass | |
| 1xLABTEK-II-PRIOR-N500 | #1 Lab-Tek II 1x2 in. chambered cover glass | |
| 1x60-PRIOR-N500 | #1 60mm Petri-dish | |
| 1xT25-PRIOR-N500 | #1 Nunc and Greiner T25 flask | |
| 2x35-PRIOR-N500 | #2 35mm Petri-dish | |
| 2xGS-PRIOR-N500 | #2 1x3in. chamberslides | |
| 2xLABTEK-PRIOR-N500 | #2 Lab-Tek 1x2 in. chambered cover glass | |
| 2xLABTEK-II-PRIOR-N500 | #2 Lab-Tek II 1x2 in. chambered cover glass | |
| 2x60-PRIOR-N500 | #2 60mm Petri-dish | |
| 4x35-PRIOR-N500 | #4 35mm Petri-dish | |
| GS35-PRIOR-N500 | #1 1x3in. chamberslide and #2 35mm Petri-dish | |
| LABTEK-35-PRIOR-N500 | #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish | |
| LABTEK-II-35-PRIOR-N500 | #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish | |
| LABTEK-60-PRIOR-N500 | #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish | |
| LABTEK-II-60-PRIOR-N500 | #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish | |
| GS60-PRIOR-N500 | #1 1x3in. chamberslide and #1 60mm Petri-dish | |
| 6035-PRIOR-N500 | #1 60mm Petri-dish and #1 35mm Petri-dish | |
Available LIDs
| H301-KOEHLER LID | Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm | |
H301-UP
Stage compatibility: fits on Upright Microscopes
- Part number of the objectives in use must be specified in purchase order
- XY stage model and serial number must be specified in purchase order
The chamber can fit:
- 35/60 mm Petri
- 1x3 in. / 1x2 in. chambered slides
- Suitable for dipping lens
- Manageable chamber thanks to the opening of the lid to introduce the objective
- Magnets allow easy interchange chamber insert
- Magnetic locks hold Petri, Slides in correct position inside the chamber
- Perfusion holes: 12 channels for 2.0 mm O.D. tubings are available
- To control the humidity into the chamber humidity module is recommended: HM-ACTIVE
Available Inserts
| UP-1x35-M | #1 35mm Petri-dish |  |
| UP-1xGS-M | #1 1x3 in. chamber slide |  |
| UP-1xLABTEK-M | #1 Lab-Tek 1x2 in. chambered cover glass |  |
| UP-1xLABTEK-II-M | #1 Lab-Tek II 1x2 in. chambered cover glass |  |
| UP-1x60-M | #1 60mm Petri-dish |  |
![H301-UP-[ADAPTERS-1]_600x600.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_up/H301-UP-%5BADAPTERS-1%5D_600x600.jpg)
H301-PRIOR-NZ100-H117
Stage compatibility: fits on Prior NZ100/200 in Prior H117
The chamber can fit:
- 35/60 mm Petri
- 1x3 in. chambered slides
- The chamber hosts #1 35mm petri or #1 chamber slide
- Flexible chamber height thanks to the removable chamber riser required to perform perfusion
- Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in chamber riser
Available Drawings
.JPG)
![H301-PRIOR-NZ100-H117-[DIMENSIONS]_600x600.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/h301_prior_nz100_h117/H301-PRIOR-NZ100-H117-%5BDIMENSIONS%5D_600x600.jpg)
Mobile: +1 (650) 410 0756